IQOO Z6 Lite 5G PD2235F Flash File (Stock ROM)

iqoo z6 lite 5g flash file

IQOO Z6 Lite 5G PD2235F Flash file can be used for fix hang on logo, bricked device and other software problems and used for unlock device screen lock Pattern, FRP. Download Full flash file firmware for the device and use AF Tool For Latest. Always use latest version to flash and unlock the device.

Download IQOO Z6 Lite 5G PD2235F Flash File Firmware:

    WhatsApp me for flashing +917017426154

    About IQOO Z6 Lite 5G

    IQOO Z6 Lite 5G is Powered by Qualcomm SM4375 Snapdragon 4 Gen 1 5G 6nm Latest Chipset. It comes with 4GB and 6GB of RAM. IQOO Z6 Lite 5G come with 5000mAh non-removable battery and fast charging 18W. IQOO Z6 Lite 5G runs Fun Touch 12 is based on Android 12 and packs 64GB and 128GB of inbuilt storage and phone don’t have dedicated SD card slot to extend device storage.

    Pre-requisites before flashing IQOO Z6 Lite 5G PD2235F

    Battery should be charged up to 70%
    Make sure you have IQOO USB OG Cable
    Download and install AF Vivo Tool in PC 
    Download And install drivers in your pc
    Obviously Knowledge of flashing.

    The Advantage Of Stock ROM:

    • Flash Stock ROM to unbrick your IQOO Z6 Lite 5G
    • Flash Stock ROM to fix the boot loop problem
    • Upgrade And Downgrade IQOO Z6 Lite 5G
    • Unroot and fix bugs on your phone
    • To fix the lag or Stutter on your IQOO Z6 Lite 5G
    • By flashing Stock ROM, you can solve software problems
    • Revert back to Stock to gain your warranty.

    Note: Take a complete backup before doing flash and unlock, therefore we are not responsible for any data loss on the device.

    How to Flash IQOO Z6 Lite 5G PD2235F:

    Recommended tool to use for flash this device :AF Tool

    1. Download and install Qualcomm driver in your computer. if in case Qualcomm drivers are already installed on the computer, skip the step.
    2. Download and extract Flash file
    3. Download, Install and run QPST Flash Tool
    4. Connect Phone in EDL Mode by shorting EDL points
    5. Add Port in QPST Tool
    6. Click on Load XML and select rawprogram_unsparse.xml from stock rom folder
    7. Click on Load Patch and select patch0.xml from stock rom folder
    8. Click on Download Button and wait for flash finish
    9. All Done.

    Note: If your device is not connecting to pc then download the driver from above and install in your pc.

    WhatsApp me if you having any issue +917017426154

    If you facing any problem in file or flashing your device, Contact us here


    Please enter your comment!
    Please enter your name here