Realme X50 Pro RMX2076 Flash File (Stock Rom)

realme x50 pro flash file

Realme X50 Pro RMX2076 Flash File can be used to fix hang on the logo and remove all screen locks. This file will remove all type of screen lock like Pattern and frp after flash. Always use latest flash file to flash Realme X50 Pro check device version by dial code *#899# in emergency dial. download the file with direct download link given below and read all flashing instructions before flashing the phone.

Download Realme X50 Pro RMX2076 Flash File:

    Whatsapp me for login +917017426154

    Realme X50 Pro is a qualcomm model from realme. first boot in recovery mode by pressing volume down button with power key and then connect to pc with USB cable and tap on Ver 1.2 3-5 times and click OK, you device will be connect to pc in Qualcomm 9008 mode. you can see the qualcomm port in device manager in pc. Click on Start All button in tool after device connect, flashing will be started. after flashing complete device will boot automatically and all screen locks will be removed and demo mode also fixed.

    when you run flash tool in your pc it will ask you to log in because tool required login credentials then it can be flash. if you don’t have then simply contact me or message me on the facebook page. It’s Paid Service.

    How To Flash Realme X50 Pro RMX2076:

    1. Download the firmware & extract
    2. Out of the icon appearing, Double click on MSM Download Tool
    3. After tool launch on your pc, click on Start All
    4. Switch off your mobile and connect it to pc by pressing volume up and down button
    5. It will lead you to successful flashing.

    Whatsapp me for login +917017426154

    Note: If your device is not connecting to pc then download the driver from above and install in your pc.

    If you getting any error in flashing then Contact Me. I will help you.


    1. For two weeks I was the proud owner of this phone model – Realme X50 Pro (RMX2075) – European version 12×256.
      I woke up this morning (12 Sep 2020) and saw that the phone was turned off.
      Before that, before going to bed, he worked and the battery was 100% charged.

      At the moment, I cannot enable it by any combination.
      – Press and hold both Power and Volume Up buttons
      – Press and hold both Power and Volume Down buttons
      – Press and hold the Power button only.
      The only back screen even during the charging. Just nothing.

      Has anyone encountered such a problem?
      Please advise what to do.


    Please enter your comment!
    Please enter your name here